Normal Operation and Fault Conditions
WARNING: This page is about a different variant/trim than selected.
The SelectShift™ switch is a toggle switch integral to the selector lever knob. When the selector lever is placed in the S position, the upshift/downshift feature becomes activated. If a new switch is required install a new selector lever knob.
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0815 | Upshift Switch Circuit | The TCM detects a voltage high signal when an upshift is requested. |
| P0816 | Downshift Switch Circuit | The TCM detects a voltage high signal when a downshift is requested. |