LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Dual Clutch Transaxle (DCT) POWERSHIFT (DPS6/6DCT250)) >> Disassembly and Assembly of Subassemblies >> Input Shaft >> Disassembly

Input Shaft: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Fig 1: Identifying Input Shaft
    G08064311Courtesy of FORD MOTOR CO.
  2. General Equipment  : Bearing Separator

    General Equipment  : Hydraulic Press

    Fig 2: Removing Input Shaft Bearing
    G08064312Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals