Sectional view
WARNING: This page is about a different variant/trim than selected.
| Item | Description |
|---|---|
| 1 | Engaging bearing 2 Comments: Actuates the lever spring 2 of the 2nd clutch |
| 2 | Engaging bearing 1 Comments: Actuates the lever spring 1 of the 1st clutch |
| 3 | Compensating element |
| 4 | Guide sleeve |
The two engaging bearings are accommodated by the guide sleeve in such a way that they can be moved independently of each other. The sliding sleeves are slotted for this purpose and engage in segments in each other. The compensating element is used to compensate for any offset to the actuating levers of the electromechanical lever actuators.
The two engaging bearings are each equipped with a hardened engaging disc. This lies loose on the engaging bearing and transmits the axial forces.