LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Dual Clutch Transaxle (DCT) POWERSHIFT (DPS6/6DCT250)) >> Description and Operation >> Transmission Description - System Operation and Component Description >> System Operation >> Control Strategies >> Rollback prevention function

Rollback prevention function

WARNING: This page is about a different variant/trim than selected.
NOTE: This function is only activated if the vehicle is equipped with hill start control.

If the vehicle is stopped while driving uphill, then 1st gear is pre-selected in 'P' and 'N'. The pressure in the brake system is held until the engine torque is sufficient to move the vehicle uphill.

scientia non olet · About LEMON Manuals