Removal and Installation: Thermostat: Removal
WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: HEALTH AND SAFETY PRECAUTIONS .
- Refer to: Cooling System Draining and Vacuum Filling .
- Be prepared to capture escaping fluid.
General Equipment: Hose Clamp Remover/Installer
- Torque: 10 Nm
WARNING:
Before beginning any service procedure in this service information, refer to Safety Warnings in
SERVICE INFORMATION
General Information. Failure to follow this instruction may result in serious personal injury.