LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Cooling System - 2.0L ECOBOOST) >> Removal and Installation >> Degas Bottle >> Removal

Degas Bottle: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.
  1. Refer to: HEALTH AND SAFETY PRECAUTIONS .
  2. Fig 1: Identifying Pressure Relief Cap
    G08063643Courtesy of FORD MOTOR CO.
  3. Fig 2: Identifying Degas Bottle Hose
    G08063644Courtesy of FORD MOTOR CO.
  4. Fig 3: Identifying Degas Bottle
    G08063645Courtesy of FORD MOTOR CO.
  5. Fig 4: Locating Degas Bottle Hose Clamp
    G08063646Courtesy of FORD MOTOR CO.
  6. Fig 5: Locating Degas Bottle Bolts
    G08063647Courtesy of FORD MOTOR CO.