LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Cooling System - 2.0L ECOBOOST) >> Removal and Installation >> Degas Bottle >> Installation

Degas Bottle: Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Fill the degas bottle.

    Material: Motorcraft® - Orange Antifreeze/Coolant Prediluted / VC-3DIL-B (WSS-M97B44-D2)

  3. Fig 1: Identifying Pressure Relief Cap
    G08063643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals