Coolant Pump: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.

Refer to: HEALTH AND SAFETY PRECAUTIONS .
Refer to: Cooling System Draining and Vacuum Filling .
Loosen: 2 turn(s)

Fig 1: Locating Pulley Bolts
Courtesy of FORD MOTOR CO.
Fig 2: Rotating Coolant Pump Tensioner Pulley
Courtesy of FORD MOTOR CO.
Fig 3: Locating Pulley Bolts
Courtesy of FORD MOTOR CO.
Torque: 10 Nm

Fig 4: Locating Coolant Pump Bolts
Courtesy of FORD MOTOR CO.