Variable Valve Timing (VVT) Unit: Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not reuse the washers, new washers must be installed.

Fig 1: Locating Camshaft Phaser And Sprocket Washers
Courtesy of FORD MOTOR CO.
NOTE: Do not tighten the bolts at this time. The bolts will be tightened during the timing drive component installation procedure.

Fig 2: Locating Bolts Of Intake And Exhaust Camshaft Phaser And Sprockets
Courtesy of FORD MOTOR CO.
Refer to: Timing Drive Components .