LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Mechanical - 2.0L ECOBOOST) >> Removal and Installation >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: JACKING AND LIFTING - OVERVIEW .
  2. Refer to: Oil Pan  .
  3. NOTE: A new gasket must be installed.
    Fig 1: Locating Bolts And Oil Pump Screen And Pickup Tube
    G08063159Courtesy of FORD MOTOR CO.
  4. Discard the specified component. Follow local disposal regulations.

    Torque  : 10 Nm