LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Mechanical - 2.0L ECOBOOST) >> Removal and Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to: JACKING AND LIFTING - OVERVIEW .
  2. Refer to: BATTERY DISCONNECT AND CONNECT .
  3. Fig 1: Locating Intake Manifold Harness Connector And Retainer
    G08062978Courtesy of FORD MOTOR CO.
  4. Fig 2: Locating Intake Manifold Hose And Retainers
    G08062979Courtesy of FORD MOTOR CO.
  5. Fig 3: Locating Underbody Shield Bolts
    G08064967Courtesy of FORD MOTOR CO.
    1. Refer to: QUICK RELEASE COUPLING .
    Fig 4: Locating Intake Manifold Harness Connectors, Bolts And Clamps
    G08062981Courtesy of FORD MOTOR CO.
  6. Fig 5: Identifying Intake Manifold Bolts Loosing Sequence
    G08062982Courtesy of FORD MOTOR CO.