Removal and Installation: Flywheel: Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Special bolts are used for installation. Do not use standard bolts.

Fig 1: Identifying Flexplate Bolts Tightening Sequence

Courtesy of FORD MOTOR CO.

Special Tool(s) : 303-103 (Holding Tool, Flywheel)
Torque :

Stage 1: 50 Nm

Stage 2: 80 Nm

Stage 3: 112 Nm
Refer to: CLUTCH DISC AND PRESSURE PLATE - VEHICLES WITH: 5-SPEED MANUAL TRANSMISSION - MTX75 .
After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure.