Engine Mount: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Refer to: JACKING AND LIFTING - OVERVIEW .
Fig 1: Locating Underbody Shield Bolts
Courtesy of FORD MOTOR CO.
Fig 2: Locating Tank And Tube Retainers
Courtesy of FORD MOTOR CO.
General Equipment : Trolley Jack
General Equipment : Wooden Block

Fig 3: Supporting Engine Using Floor Jack And Wooden Block
Courtesy of FORD MOTOR CO.
1. Torque : 80 Nm
2. Torque : 90 Nm
Fig 4: Locating Engine Mount Nuts And Bolts
Courtesy of FORD MOTOR CO.