Crankshaft Rear Seal: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Refer to: JACKING AND LIFTING - OVERVIEW .
Fig 1: Identifying Oil Level Dip Stick
Courtesy of FORD MOTOR CO.
Remove the following items:
1. Refer to: AIR CONDITIONING (A/C) COMPRESSOR BELT .
2. Refer to: Flywheel .
Fig 2: Locating Hose Clamps
Courtesy of FORD MOTOR CO.
Relocate and support the component.

Fig 3: Locating A/C Compressor Bolts And Connector
Courtesy of FORD MOTOR CO.
Torque : 27 Nm

Fig 4: Locating Drain Plug
Courtesy of FORD MOTOR CO.
NOTE: If the oil pan is not removed, damage to the rear oil seal retainer joint may occur.

Fig 5: Locating Engine Front Cover-To-Oil Pan Fasteners
Courtesy of FORD MOTOR CO.
Fig 6: Locating Oil Pan Bolts
Courtesy of FORD MOTOR CO.
Discard the specified component. Follow local disposal regulations.

Fig 7: Locating Crankshaft Rear Seal Retainer Plate Bolts
Courtesy of FORD MOTOR CO.