Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Remove the through-bolt from the Camshaft Front Oil Seal Installer.

Fig 1: Installing Crankshaft Front Oil Seal Using Camshaft Front Oil Seal Installer

Courtesy of FORD MOTOR CO.

Apply the specified lubricant to the specified component.
Special Tool(s) : 303-096 (Installer, Camshaft Front Oil Seal)

Material : Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil / XO-5W30-QSP (WSS-M2C946-A)
Refer to: Crankshaft Pulley .