Fuel System: Overview

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

The fuel system consist of:

a Closed Loop Pressure Control System (CLPCS).
a standard fuel tank.
fuel, vapor and brake tubes in an integrated bundle assembly attached to the underside of the vehicle by retaining clips.
a FTP sensor (part of the fuel vapor tube assembly).
a lifetime fuel filter (serviced as part of the FP module).
a FP module that supplies fuel under pressure to the high pressure FP.
a serviceable fuel level sender mounted on the FP module.
an Easy Fuel™ fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
a supplemental refueling adapter located in the spare tire compartment.

FP Shut-off Feature

In the event of a moderate to severe collision, the vehicle is equipped with a FP shut-off feature that is initiated by the event notification signal.