LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus S, Standard Trans, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Electronic Engine Controls - 2.0L ECOBOOST) >> Removal and Installation >> Variable Valve Timing (VVT) Oil Control Solenoid >> Removal

Variable Valve Timing (VVT) Oil Control Solenoid: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.
  1. Refer to: Health and Safety Precautions  ( HEALTH AND SAFETY PRECAUTIONS ).
  2. Refer to: Valve Cover  ( VALVE COVER .
  3. NOTE: Note the position of the components before removal.
    NOTE: Make sure that the components are installed to the position noted before removal.
    Fig 1: Locating VVT Oil Control Solenoid Bolts
    G08063992Courtesy of FORD MOTOR CO.
  4. Torque  : 10 Nm