Heated Oxygen Sensor (HO2S): Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formula in illustration .
Special Tool(s) : 303-476 (Socket, Exhaust Gas Oxygen Sensor)

Torque : 48 Nm

Fig 1: Installing Exhaust Gas Oxygen Sensor Using Special Tools
Courtesy of FORD MOTOR CO.

Fig 2: Torque Wrench Adapter Formulas
Courtesy of FORD MOTOR CO.
Fig 3: Locating Exhaust Gas Oxygen Sensor Connector And Clamp
Courtesy of FORD MOTOR CO.
Refer to: Battery Tray ( BATTERY TRAY ).