System Operation: Configuration
The IPC contains items that are configurable. Configurable items often include customer preference items, which can also be set with a scan tool. The remaining configurable items can only be set through the car configuration parameters. REFER TO MODULE CONFIGURATION SYSTEM .
PROVE-OUT
| Indicator | Indicator Type | Prove-Out Duration |
|---|---|---|
| ABS | Warning | 3 seconds |
| Airbag | Warning | 8 seconds |
| Brake | Warning | 3 seconds |
| Charge | Warning | Engine startup |
| Fog lamp | Informational | None |
| Grade assist | Informational | None |
| High beam | Informational | None |
| Information | Informational | None |
| Lights on | Informational | None |
| Low fuel | Warning | 3 seconds |
| Low oil pressure | Informational | Engine startup |
| MIL | Warning | Engine startup |
| Stability/traction control (sliding car icon) | Warning | 3 seconds |
| Stability/traction control disabled (sliding car OFF icon) | Informational | 3 seconds |
| TPMS | Warning | 3 seconds |
| RH / LH turn | Informational | None |
The IPC and other modules carry out a display prove-out to verify all module controlled warning/indicator lamps and monitored systems are functioning correctly within the IPC. The IPC and other modules, such as the RCM, provide a timed prove-out of some indicators while other indicators illuminate upon engine start up. When the ignition is cycled to on with the engine off, the indicators illuminate to prove-out according to the following table: