Wiper and Washer Switch

Wiper and Washer Switch

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Removal

1. Remove the steering column shroud. REFER to Steering Column Shroud. Steering Column Shroud

2. Remove the 2 wiper/washer switch screws.





3. Depress the retaining tabs and remove the wiper/washer switch.





Installation

1. Install the wiper/washer switch.

2. Install and tighten the 2 wiper/washer switch screws.





3. Install the steering column shroud. REFER to Steering Column Shroud. Steering Column Shroud