LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus Electric >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels & Tires -- Electric >> Diagnosis and Testing >> Wheels and Tires >> Pinpoint Tests >> Inner Edge, Shoulder Wear >> Pinpoint Test A: Inner Edge, Shoulder Wear

Pinpoint Test A: Inner Edge, Shoulder Wear

  1. A1 MEASURE THE TREAD DEPTH 
    • Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.

    Is the tread depth greater than 1.588 mm (0.0625 in)? 

    • Yes  : ROTATE the wheel and tire assemblies.

      CHECK and ADJUST the toe to nominal +0.15 degrees (toe in). CHECK and ADJUST caster and camber to nominal.

      REFER to: FRONT CAMBER AND CASTER ADJUSTMENT .

    • No  : INSTALL a new tire(s). CHECK and ADJUST the toe to nominal.

      CHECK and ADJUST caster and camber to nominal. REFER to: FRONT CAMBER AND CASTER ADJUSTMENT .

scientia non olet · About LEMON Manuals