Front Lower Arm: Removal

NOTE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Refer to: SPRING .
Finger tight only.
NOTE: Fabricate a spacer.

NOTE: Focus, Focus-BEV and Focus-ST require different length spacers.
1. Focus, Focus-BEV.
2. Focus-ST.
  
  Fig 1: Identifying Spacer Dimension
  Courtesy of FORD MOTOR CO.
General Equipment : Transmission Jack