Fuel Tank and Lines - Overview: Overview
WARNING: This page is about a different car, the 2016 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
The fuel system consists of:
- a Closed Loop Pressure Control System (CLPCS).
- a standard fuel tank.
- fuel, vapor and brake tubes in an integrated bundle assembly attached to the underside of the vehicle by retaining clips.
- a Fuel Tank Pressure (FTP) sensor (part of the fuel vapor tube assembly).
- a lifetime fuel filter (serviced as part of the Fuel Pump (FP) module).
- a Fuel Pump (FP) module that supplies fuel under pressure to the high pressure Fuel Pump (FP).
- a serviceable fuel level sender mounted on the Fuel Pump (FP) module.
- an Easy Fuel™ fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
- a supplemental refueling adapter located in the spare tire compartment.
FP Shut-off Feature
In the event of a moderate to severe collision, the vehicle is equipped with a FP shut-off feature that is initiated by the event notification signal.