LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus Electric >> Repair and Diagnosis >> External Pages >> Different car >> Section 613 (Fuel System - General Information - 2.0L DURATEC-He (125KW/170PS) - Mi4 (Except Electric Vehicle)) >> Diagnosis And Testing >> Fuel System >> PCM DTC Chart

PCM DTC Chart

WARNING: This page is about a different car, the 2016 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. For information about these practices, REFER to: Diagnostic Methods .

DTC Description Action
P0144A Evaporative Emission System Purge Vapor Line Restricted/Blocked GO to Pinpoint Test A 
P0446 Evaporative Emission System Vent Control Circuit GO to Pinpoint Test A 
P0451 Evaporative Emission System Pressure Sensor/Switch Range/Performance GO to Pinpoint Test A 
P0452 Evaporative Emission System Pressure Sensor/Switch Low GO to Pinpoint Test A 
P0453 Evaporative Emission System Pressure Sensor/Switch High GO to Pinpoint Test A 
P0454 Evaporative Emission System Pressure Sensor/Switch Intermittent GO to Pinpoint Test A 
P0455 Evaporative Emission System Leak Detected (Gross Leak/No Flow) GO to Pinpoint Test A 
P1450 Unable to Bleed up Fuel Tank Vacuum GO to Pinpoint Test A 
P1451 Evaporative Emission System Vent Control Circuit GO to Pinpoint Test A 
P260F Evaporative Emission System Vent Control Circuit GO to Pinpoint Test A 
P2418 EVAP System Switching Valve Control Circuit/Open GO to Pinpoint Test A 
All other DTCs - REFER to: Electronic Engine Controls .