Exhaust System Alignment

WARNING: This page is about a different car, the 2016 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

1.

Refer to: Health and Safety Precautions

2.

With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview

3.

Loosen all fasteners joining the exhaust system components.

4.

Beginning at the front of the vehicle, align the exhaust system to establish the maximum clearance. Make sure all fit pipes are pushed all the way into the preceding pipe and the notches are correctly lined up with the tabs.

5.

Beginning at the front of the vehicle, tighten all fasteners and clamps to specification.

6.

Start the engine and check the exhaust system for leaks.