Transmission Draining and Filling: Filling

WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the fill plug.

Courtesy of FORD MOTOR COMPANY

2.

Fill the transmission through the fill hole until it is level with the bottom of the fill hole.
Material: Motorcraft ® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)

Courtesy of FORD MOTOR COMPANY

3.

Drain fluid from the fill hole. Use the General Equipment: Fluid Suction Gun
Volume: 0.53 qt (500 ml)

Courtesy of FORD MOTOR COMPANY

4.

Install the fill plug.
Torque: 30 lb.ft (40 Nm)

Courtesy of FORD MOTOR COMPANY

5.

Install the underbody shield.

Courtesy of FORD MOTOR COMPANY