Disassembly And Assembly Of Subassemblies: Differential: Disassembly
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use vise jaw protectors.
- 2.
Remove the bearing. Use the General Equipment: Bearing Separator. Use the General Equipment: Puller
- 3.
Remove the bearing. Use the General Equipment: Bearing Separator. Use the General Equipment: Puller
- 4.
Remove the following items:- 1.
Loosen: Four turn(s)
- 2.
Remove and discard the bolts.
- 3.
Save four bolts for reassembly.
- 1.