LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus Electric >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Parking Aid System - With Active Park Assist -- (Except Electric)) >> Diagnosis And Testing >> Parking Aid >> Diagnostic Routines >> PINPOINT TEST E: The Active Park Assist Switch Status LED Is Inoperative Or Always On >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

The Parking Aid Module (PAM) supplies voltage to the active park assist switch status LED  when the active park assist system is activated.

DTC FAULT TRIGGER CONDITION DESCRIPTION

DTC Description Fault Trigger Conditions
B129F:11 Function LED - Semi-Automatic Advanced Parallel Park: Circuit Short To Ground A continuous and on-demand DTC  that sets when the active park assist switch status LED  circuit is shorted to ground.
B129F:12 Function LED - Semi-Automatic Advanced Parallel Park: Circuit Short To Battery A continuous and on-demand DTC  that sets when the active park assist switch status LED  circuit is shorted to battery voltage or is open.
scientia non olet · About LEMON Manuals