Pinpoint Test AE: The Chime Always Sounds
- AE1 CHECK THE INSTRUMENT PANEL CLUSTER (IPC) FOR MESSAGE CENTER MESSAGES
- Ignition OFF.
- Check the IPC and message center for illuminated warning indicator or message center displays.
Does the IPC have any message center messages displayed?
- Yes : REPAIR all message center indication concerns first. REFER to SYMPTOM CHART: IPC or SYMPTOM CHART: INFORMATION AND MESSAGE CENTER .
- No : GO to AE2
- AE2 CHECK THE EXTERIOR LIGHTING OPERATION
- Place the headlamp switch in the OFF position.
- Close all doors.
- Wait one minute.
- Observe the exterior lights.
Are the headlamps and parking lamps off?
- Yes : GO to AE3
- No
: REFER to: HEADLAMPS
.
REFER to: PARKING, REAR AND LICENSE PLATE LAMPS .
- AE3 CHECK THE INTERIOR LIGHTING OPERATION
- Open and close the driver door.
- Observe the interior lights.
Do the interior lights operate correctly from the driver door?
- Yes : GO to AE4
- No : REFER to: INTERIOR LIGHTING .
- AE4 PERFORM THE BODY CONTROL MODULE (BCM) SELF-TEST
- Using a scan tool, perform the BCM self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
- Yes : REFER to: BODY CONTROL MODULE (BCM) .
- No
: INSTALL a new IPC
.
REFER to: Instrument Panel Cluster (IPC) .