Network Message Chart
MODULE NETWORK INPUT MESSAGES - INSTRUMENT PANEL CLUSTER (IPC)
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Ambient air temperature data | PCM | Input used to control the outside air temperature display and for the temperature related plug vehicle in to charge message displays. |
| Battery charger service required | BECM | Input used to display the powertrain malfunction (wrench) indicator. |
| Battery electrical performance status | PCM | Input used to control the limited battery performance messages and the limited battery performance message center warning indicator. |
| Battery service required | BECM | Input used to display the powertrain malfunction (wrench) indicator. |
| Battery warning indicator request | BECM | Input used to display the hazard warning message and the hazard message center warning indicator. |
| Brake fluid level warning | BCM | Brake fluid level status input used to control the low brake fluid level warning message. |
| Brake pedal applied | BCM | Used to control the PRNDL not in park warning message. |
| Brake (red) warning indicator request | ABS module | ABS input used to control the check brake system warning message. |
| Charge cord connection status | PCM | Input used to control the charge cord connected message center indicator. |
| Check plug to start display request | PCM | Input used to control the charge cord connected message center indicator and the drive prevention override message center warning display. |
| Climate power usage data | PCM | Input used to display the reduce climate control usage message center displays. |
| Cruise control set speed | PCM | Input used to control the displayed set speed in the cruise control message center indicator. |
| Cruise control status | PCM | Input used to control the cruise control message center indicator. |
| Door status | BCM | Input used to control the door ajar and liftgate ajar warning messages and the door-liftgate ajar message center warning indicator. |
| Driver safety belt buckle status | RCM | Input used to control the buckle up MyKey® message center display. |
| EPAS driver information display | PSCM | Input used to control the service power steering warning message. |
| GPS data | GPSM | Input used to display the compass. |
| Key warning indication data | BCM | Input used to display the Intelligent Access (IA) no key detected, place key in backup slot, accessory power active and press brake to start message center warning displays. |
| Perimeter alarm chime request | BCM | Used to control the stop alarm and start vehicle messages. |
| Return home message display | APIM | Input used to control the driving range limit (get me home) message. |
| Motor over-temperature display request | PCM | Input used to control the motor over-temperature message center warning and the motor over-temperature message center warning indicator. |
| Navigation destination | FCDIM | Input used to display the budget set ready message center display. |
| Park brake warning | BCM | Parking brake position switch input used to control the parking brake applied warning message. |
| Passive key warning | RFA | Input used to control the Intelligent Access (IA) key not inside vehicle message. |
| Power system status | BCM | Input used to display the charging system fault warning message and charging system message center indicator. |
| Powertrain ready status | PCM | Input used to control the ready to drive message center display. |
| Powertrain warning indicator request | PCM | Input used to display the hazard warning message and the hazard message center warning indicator. |
| Ready to drive request | PCM | Input used to display the ready to drive message, the budget set ready messages and the ready to drive message center indicator. |
| RKE data | RFA | Input used to control the Intelligent Access (IA) key inside vehicle warning message. |
| Stability-traction control indicator request | ABS module | Input used to display the service AdvanceTrac® message. |
| Steering column failure | BCM | Input used to display the Intelligent Access (IA) steering column lock message. |
| Tire mobility kit data | BCM | Input used to control the tire mobility kit status message. |
| Transmission gear display actual | PCM | Used to control the PRNDL not in park warning message. |
| Transmission service required | PCM | Input used to display the powertrain malfunction (wrench) message center indicator. |
| Transmission shift mode | PCM | Input used to control the grade assist message center warning indicator. |
| Transmission warning indicator request | PCM | Input used to display hazard warning message display and message center warning indicator. |
| Transport mode | BCM | Input used to display the factory mode or transport mode messages. |
| Vehicle range display data | PCM | Input used to control the low battery charge message, the budget set ready message and the low battery charge message center warning indicator. |
| Washer fluid level low | BCM | Input used to control the low washer fluid level message center warning indicator. |
| Vehicle speed | PCM | Input used to control the PRNDL not in park warning message. |
| Vehicle range display data | PCM | Input used to display the reduce climate control usage messages. |