Removal and Replacement

Steering Wheel Switch

High Series

NOTE: RH shown, LH similar










Low Series

NOTE: RH shown, LH similar









Removal and Installation

High and Low Series

1. Remove the driver air bag module.

Low Series

2. Using a suitable flat-bladed tool, detach the steering wheel switch from the steering wheel.
- Disconnect the electrical connector and remove the switch.


High Series

3. Remove the steering wheel switch bezel.
- Disconnect the steering wheel switch electrical connector.


4. Remove the 2 screws and the steering wheel switch.

High and Low Series

5. To install, reverse the removal procedure.