LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (6F50/6F55) -- Explorer >> Disassembly And Assembly Of Subassemblies >> Differential Gear Assembly >> Disassembly

Differential Gear Assembly: Disassembly

  1. NOTE: AWD  shown in the illustration, FWD  similar.

    Inspect the differential bearings for damage or excessive wear. Install new bearings if necessary.

    G08413001Courtesy of FORD MOTOR CO.
  2. Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Puller, Bearing 205-D064 (D84L-1123-A), Step Plate 205-D019 (D80L-630-8) (AWD  ) or Step Plate 205-D015 (D80L-630-4) (FWD  ).
    G08413002Courtesy of FORD MOTOR CO.
  3. NOTE: AWD  shown in the illustration, FWD  similar.

    Special Tool(s): Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C), Puller, Bearing 205-D064 (D84L-1123-A), Step Plate 205-D019 (D80L-630-8).

    G08413003Courtesy of FORD MOTOR CO.
  4. NOTE: If replacing the ring gear, it is also necessary to replace the transfer shaft.

    Check the differential assembly and the ring gear for damage. Visual check.

    G08413004Courtesy of FORD MOTOR CO.
  5. G08413005Courtesy of FORD MOTOR CO.
  6. G08413006Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals