LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control - EMTC >> Removal And Installation >> Receiver Drier - 2.0L GTDI >> Installation

Receiver Drier - 2.0L GTDI: Installation

  1. To install, reverse the removal procedure.
    1. Install new gaskets seals and O-rings seals.
    2. Add the correct amount of clean PAG oil to the refrigerant system, REFER to Refrigerant Oil Adding .
  2. Evacuate, leak test and charge the refrigerant system. REFER to Air Conditioning (AC) System Recovery, Evacuation and Charging .
scientia non olet · About LEMON Manuals