LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control - EMTC >> General Procedures >> Air Conditioning (AC) System Recovery, Evacuation and Charging >> Refrigerant System Charging

Refrigerant System Charging

  1. Lubricate the refrigerant system with the correct amount of clean PAG oil. REFER to Refrigerant Oil Adding .
  2. Connect a 199-00067  or 300-ROB34288  to the low-side and high-side service gauge port valves following the operating instructions provided by the equipment manufacturer.
  3. Set the refrigerant charge amount, and charge the refrigerant system following the instructions provided by the equipment manufacturer.