LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Auxiliary Climate Control >> DTC And Symptom Chart(S) >> Symptom Chart(s) >> Symptom Chart: Auxiliary Climate Control

Symptom Chart: Auxiliary Climate Control

Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to ENGINE CONTROLS - DIAGNOSTIC METHODS (EXCEPT DIESEL & HYBRID) for information regarding Ford-specific diagnostic practices.

SYMPTOM CHART

Condition Possible Sources Actions
  • The auxiliary HVAC functions are inoperative/do not operate correctly from touch screen only
  • Communication network
  • FDIM
  • The auxiliary blower motor is inoperative
  • Fuse(s)
  • Wiring, terminals or connectors
  • Auxiliary blower motor relay
  • Auxiliary blower motor speed control
  • Auxiliary blower motor
  • HVAC module
  • The auxiliary blower motor does not operate correctly using both the front and rear auxiliary controls
  • Wiring, terminals or connectors
  • Auxiliary blower motor relay
  • Auxiliary blower motor speed control
  • HVAC module
  • The auxiliary blower motor does not operate correctly using the rear auxiliary controls only
  • Wiring, terminals or connectors
  • Rear auxiliary control assembly
  • HVAC module
  • The auxiliary temperature control is inoperative or does not operate correctly using both the front and rear auxiliary controls
  • Wiring, terminals or connectors
  • Auxiliary blend door actuator
  • HVAC module
  • The auxiliary temperature control is inoperative or does not operate correctly using the rear auxiliary controls only
  • Wiring, terminals or connectors
  • Rear auxiliary control assembly
  • HVAC module
  • The auxiliary mode control is inoperative or does not operate correctly using both the front and rear auxiliary controls
  • Wiring, terminals or connectors
  • Auxiliary mode door actuator
  • HVAC module
  • The auxiliary mode control is inoperative or does not operate correctly using the rear auxiliary controls only
  • Wiring, terminals or connectors
  • Rear auxiliary control assembly
  • HVAC module
  • The auxiliary temperature, mode and blower motor controls are inoperative or do not operate correctly using the rear auxiliary controls only
  • Wiring, terminals or connectors
  • Rear auxiliary control assembly
  • HVAC module