Pressure Chart
WARNING: This page is about a different variant/trim than selected.
| Gear | Line Pressure at Idle KPa (psi) | Line Pressure at WOT Stall KPa (psi) | ||
|---|---|---|---|---|
| Minimum | Maximum | Minimum | Maximum | |
| P | 338 kPa (49 psi) | 379 kPa (55 psi) | - | - |
| R | 621 kPa (90 psi) | 689 kPa (100 psi) | 1, 868 kPa (271 psi) | 2, 068 kPa (300 psi) |
| N | 338 kPa (49 psi) | 379 kPa (55 psi) | - | - |
| D | 517 kPa (75 psi) | 586 kPa (85 psi) | 1, 868 kPa (271 psi) | 2, 068 kPa (300 psi) |
- 3. If the line pressure is not within specification, see the LINE PRESSURE DIAGNOSIS CHART for line pressure concern causes.
- 4. When the pressure tests are complete, install the line pressure tap plug.
- Tighten to 12 Nm (106 lb-in).