Fuel Rail: Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
LH fuel rail
- Install the LH fuel rail.
- Hand start the 2 LH fuel rail bolts.
- Connect the 3 fuel charging wiring harness retainers to the LH fuel rail.
- Connect the fuel rail-to-fuel injection pump return tube fitting at the rear of the LH fuel rail.
- Connect the fuel rail pressure sensor electrical connector at the front of the LH fuel rail.
- Connect the fuel pressure control valve electrical connector at the rear of the LH fuel rail.
- Install the LH fuel injector supply tubes. For additional information, refer to FUEL INJECTOR SUPPLY TUBE .
RH fuel rail
- Install the RH fuel rail.
- Hand start the 2 RH fuel rail bolts.
- Connect the 3 fuel charging wiring harness retainers to the RH fuel rail.
- Install the RH fuel injector supply tubes. For additional information, refer to FUEL INJECTOR SUPPLY TUBE .
Both fuel rails
- Install the fuel rail supply tube assembly. For additional information, refer to FUEL RAIL SUPPLY TUBE .