LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Seat System - Seats) >> Removal And Installation >> Seat - Front, Bucket Seat >> Notes

Seat - Front, Bucket Seat: Notes

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the INSTALLATION  steps in this procedure for seat track-to-floor retainer tightening sequence and specification.
Fig 1: Exploded View Of Front Seat With Torque Specification (Bucket Seat)
G07485891Courtesy of FORD MOTOR CO.
Item Part Number Description
1 672A40 Retainer cover
2 W714718 Seat track-to-floor bolts (3 required) (new bolts must be installed)
3 - Bucket seat
4 W714991 Seat track-to-floor nut
5 - Electrical connector(s) (if equipped) (part of 14A005)
6 W706413 Seat mounting stud