Removal and Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the steering column shrouds. For additional information, refer to STEERING COLUMN SWITCHES .
- Remove the screw.
- To install, tighten to 3 Nm (27 lb-in).
- Using a suitable tool (such as a pocket screwdriver), carefully disengage the control switch locking tabs one at a time, then remove the switch.
- To install, reverse the removal procedure.