Rear Brake Pads - F-450, F-550: Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: If installing new brake pads, install all new hardware as supplied with the brake pad kit.
To install, reverse the removal procedure.
- Lubricate the pins with silicone brake caliper grease and install new retraction clips.
- Depress the brake pedal several times, check the brake fluid level in the brake fluid reservoir and add the specified brake fluid as necessary.