LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Front Drive Axle/Differential) >> In-Vehicle Repair >> Axle Shaft Seal >> Removal

Axle Shaft Seal: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and wheel hub assemblies. For additional information, refer to FRONT SUSPENSION - FOUR WHEEL DRIVE (4WD) .
  2. Using a suitable tool, drive the axle shaft knuckle seal out of the wheel knuckle.
    Fig 1: Removing Wheel Bearing And Wheel Hub Assemblies
    G06776394Courtesy of FORD MOTOR CO.
  3. Remove the axle shaft and knuckle seal.
    Fig 2: Removing Axle Shaft And Knuckle Seal
    G07967042Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals