LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Four Wheel Drive (4WD) Systems) >> Removal And Installation >> Mode Select Switch (MSS) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the wiring harness connector.
  3. Press the 3 locking tabs to release the Mode Select Switch (MSS) switch and remove the MSS switch from the finish panel.
  4. To install, reverse the removal procedure.