LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Steering Column Switches) >> Removal And Installation >> Circuit Deactivation Ignition Module (CDIM) >> Removal

Circuit Deactivation Ignition Module (CDIM): Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 pin-type retainers.
  2. Remove the Circuit Deactivation Ignition Module (CDIM) and disconnect the electrical connector.
scientia non olet · About LEMON Manuals