LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> General Procedures >> Message Center Configuration >> Oil Life Reset and Start Value - Base Instrument Cluster

Oil Life Reset and Start Value - Base Instrument Cluster

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The base cluster message center can be identified by a 3 button message center switch on the steering wheel.
  1. Press and release the SETUP button until the message center displays OIL LIFE XXX% HOLD RESET = NEW OIL.
  2. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO XXX%.
  3. Press and release the RESET button to decrease the oil life start value (from 100% to 10%) for each 10% reduction until the desired oil life start value is displayed.
  4. Press and release the SETUP button to exit the procedure.