LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> General Procedures >> Message Center Configuration >> Coolant Changed Maintenance Reset-Optional Instrument Cluster

Coolant Changed Maintenance Reset-Optional Instrument Cluster

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The optional instrument cluster can be identified by a 5 button message center switch located on the steering wheel and a 4.2 inch LCD display located in the center of the instrument cluster.
  1. Access the message center main menu screen. Using the up and down arrow buttons scroll and select the Settings tab. Press the OK button.
  2. Using the up and down arrow buttons scroll and select the Vehicle tab. Press the OK button.
  3. Using the up and down arrow buttons scroll and select the Maintenance tab. Press the OK button.
  4. Using the up and down arrow buttons scroll and select the Coolant Changed tab. Press the OK button.
  5. Press and hold the OK button if the coolant has been changed or additive checked. A message will appear confirming the setting. To exit use the left arrow to navigate back to the main menu.
scientia non olet · About LEMON Manuals