Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

The EGR vacuum regulator solenoid is an electromagnetic device used to regulate the vacuum supply to the EGR valve. The solenoid contains a coil which magnetically controls the position of a disc to regulate the vacuum. As the duty cycle to the coil increases, the vacuum signal passed through the solenoid to the EGR valve also increases. Vacuum not directed to the EGR valve is vented through the solenoid vent to the atmosphere. At 0% duty cycle (no electrical signal applied), the EGR vacuum regulator solenoid allows some vacuum to pass, but not enough to open the EGR valve.

Fig 1: EGR Vacuum Regulator Duty Cycle Graph

Courtesy of FORD MOTOR CO.

EGR VACUUM REGULATOR SOLENOID DATA

Duty Cycle (%)	Vacuum Output
	Minimum		Nominal		Maximum
	In-Hg	kPa	In-Hg	kPa	In-Hg	kPa
0	0	0	0.38	1.28	0.75	2.53
33	0.55	1.86	1.3	4.39	2.04	6.9
90	5.67	19.2	6.3	21.3	6.93	23.47
EGR vacuum regulator solenoid resistance: 26-40 Ohms