Exhaust Intermediate Pipe - 6.7L Diesel: Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Position 2 new gaskets and the intermediate pipe in the vehicle.
- Install the 3 new catalyst and particulate filter assembly-to-exhaust intermediate pipe nuts.
- Tighten to 55 Nm (41 lb-ft).
- Install the 3 new exhaust intermediate pipe-to-tailpipe assembly nuts.
- Tighten to 55 Nm (41 lb-ft).