Hydraulic Control Unit (HCU)
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The HCU bleeding procedure must be carried out if the HCU or any components upstream of the HCU are installed new.
NOTE:
Pressure bleeding the brake system is preferred to manual bleeding.
- Follow the Pressure Bleeding or Manual Bleeding procedure steps to bleed the system.
- Connect the scan tool and follow the ABS Service Bleed instructions.
- Repeat the Pressure Bleeding or Manual Bleeding procedure steps to bleed the system.