Accumulator - Hydro-Boost®
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine and turn the steering wheel to the left and right stops 1 time.
- Stop the engine.
- Apply the brakes. The accumulator in the Hydro-Boost® power brake booster should retain enough pressure for at least 2 power assisted brake operations.
- If no power assist is felt, install a new Hydro-Boost® power brake booster, refer to POWER BRAKE ACTUATION .
- If power assist is felt, the accumulator is operating correctly at this time.