Diagnostic Overview

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

B00C2:11 and B00C2:12

Refer to OEM Wiring Diagrams - SUPPLEMENTAL RESTRAINT SYSTEM for schematic and connector information.

The BTS operates in conjunction with the OCS . The OCSM provides a reference voltage to the BTS , which changes as it passes through the sensor, based on how much tension is applied to the safety belt and BTS .

The OCSM monitors the BTS reference voltage circuit for the following faults:

Short to voltage
Short to ground

If a fault is detected, the OCSM stores DTC B00C2:11 or B00C2:12 in memory and sends a message to the RCM over the HS-CAN indicating that an OCS fault is present. Upon receipt of this message, the RCM sets DTC B00A0:09 and sends a message over the HS-CAN to the IPC to illuminate the airbag warning indicator.

DTC FAULT TRIGGER CONDITIONS DESCRIPTION

DTC	Description	Fault Trigger Conditions
B00C2:11	Passenger Seat Occupant Classification Sensor "C": Circuit Short to Ground	A fault is indicated when the OCSM senses a short to ground on the BTS reference voltage circuit.
B00C2:12	Passenger Seat Occupant Classification Sensor "C": Circuit Short to Battery	A fault is indicated when the OCSM senses a short to voltage on the BTS reference voltage circuit.